LCD DIGITAL PANEL METERS
DK500 Series
3 1/2 Digit - Snap-in Bezel Mount
| Features and Benefits: | ||
| ◊ Low-cost, high-performance replacement for many OEM DPMs ◊ Mounting: Snap-in bezel mount eliminates mounting hardware ◊ Low power: choice of 180µA (9V) or 2.5mA (+5V) ◊ Space-saving design: only 1" (25 mm) deep ◊ Occupies less than 2.5 X 1.1 inches of front panel space ◊ 3 1/2 digits with high-contrast LCD ◊ Optional loop powered 4 to 20mA process inputs available (see DK590) |
||
Specifications: |
||
|---|---|---|
| Display: | Digits: | 3 ½ digits (±1999 counts) |
| Type: | 0.5" (12mm) high-contrast reflective LCD | |
| Polarity: | automatic, “-” displayed | |
| Decimal Points: |
3 position, user-selectable | |
| Overrange: |
three lower order digits blank for inputs >1999 and < -1999 | |
| Hold: | available OEM option, contact factory | |
| Inputs: | Ranges: |
±200.0 mV, ±2.000 V, ±20.00 VDC | Configuration: |
bipolar & differential |
| Protection: |
±350 VDC, (±100 VDC on 200 mV range) | Impedance: |
>10 MΩ, (>1 MΩ on 20 V range) |
| Performance: | Accuracy: |
±(0.1% +1 count) typical; ±(0.1% + 2 counts) maximum | Conversion Rate: |
2.5 per second |
| Normal Mode Rejection: |
>30 dB @ 60 Hz | Common Mode Range: |
±1 VDC |
| Common Mode Rej.: |
>86 dB | Zero Adjustment: |
automatic |
| Warmup: |
10 minutes typical | Temperature Coefficient: |
±100 ppm per °C typical |
| Environment: | Operating Range: |
0 to 50 °C | Storage Range: |
-10 to 70 °C |
| Power Supply: | 5V powered: |
+5 VDC (±5%) at 2.5 mA | 9V powered: | +7.2 to +12 V at 180 µA | Mounting: | snap-in bezel mount |
| Connection: | 13 pins, 0.025" square on 0.1" lefts - pin 3 missing | |
| Ordering Information: | |
| PART NUMBER | INFO |
| DK500 |
NO BACKLIGHT LCD, RANGE: 200mV, POWER: +5VDC |
| DK501 |
NO BACKLIGHT LCD, RANGE: 2V, POWER: +5VDC |
| DK502 |
NO BACKLIGHT LCD, RANGE: 20V, POWER: +5VDC |
| DK503 |
NO BACKLIGHT LCD, RANGE: 200mV, POWER: +/-5VDC |
| DK504 |
NO BACKLIGHT LCD, RANGE: 2V, POWER: +/-5VDC |
| DK505 |
NO BACKLIGHT LCD, RANGE: 20V, POWER: +/-5VDC |
| J4C13 |
13 pin Connector / Wire Assembly, RED on pin #1, BLACK on pin #2 |
| PW2-5 |
DC Power Supply, 120 AC Input, 5 VDC @ 300mA Output |
| PW2-12 |
DC Power Supply, 120 AC Input, 12 VDC @ 200mA Output |
| PW2-24 |
DC Power Supply, 120 AC Input, 24 VDC @ 100mA Output |