Contact Us | Site Map


Loop Powered LCD Digital
Panel Meters

DK190-XEC SERIES

3½ Digit LCD with Loop Powered Board

DM0-4X-XEC.jpg

Features and Benefits:
◊ Low-cost, high-performance replacement for many OEM DPMs
◊ Optional RED, GREEN, AMBER or POS GREEN backlit LCD
◊ Snap-in bezel mount eliminates mounting hardware
◊ Resistant to RF and EMI
◊ 3½ digits with high-contrast LCD
◊ 4-20 mA  loop powered input
◊ User-selectable decimal points
◊ User-selectable, displayed engineering units
Specifications:
Display:
 Digits: 3 ½ digits (±1999 counts)
  Type: 45" (11.4 mm) 7 segment high contrast LCD
Backlighting:   Optional Red Negative (red numbers/black background)
Optional Green Negative (green numbers/black background) Optional Amber Negative (amber numbers/black background)
Optional Green Positive (black numbers/green background)
  Polarity: automatic, "-" displayed
  Annunciators: °F, °C, PSI, %, user-selectable
  Decimal Points:
3 position, user-selectable
  Overrange: three lower order digits blank for inputs >1999 & < --1999
Inputs: Ranges:
 4-20 mA DC
  Configuration:
bipolar differential
  Impedance: 300Ω nominal
Performance:
Accuracy: ±(0.1% fs + 2 count)
  Conversion Rate: 3 per second
  Normal Mode Rejection:
>30 dB @ 60 Hz
  Common Mode Range: ±1 VDC max
  Common Mode Rej.: >86 dB
  Adjustments: span (gain) and zero (offset)

Warmup: 10 minutes typical
  Temperature Coeff.: ± 100 ppm per °C typical
Environment: Operating Range: 0 to 50 °C
  Storage Range: -10 to 70 °C
Power Supply:
  powered by the milliamp control loop
  Optional Backlight: 24 VDC at 35 mA typical
Mounting:   snap-in bezel mount or clamp and gasket
Connection:   2 screw terminal (4 with backlight)
     

 


Ordering Information:
PART NUMBER INFO
DK191-XEC
 No Backlight LCD, RANGE: 4-20mA, MOUNTING: Snap in or clamp and gasket
DK192-XEC
 Negative Amber LCD, RANGE: 4-20mA, MOUNTING: Snap in or clamp and gasket
DK193-XEC
 Negative Green LCD, RANGE: 4-20mA, MOUNTING: Snap in or clamp and gasket
DK194-XEC
 Negative Red LCD, RANGE: 4-20mA, MOUNTING: Snap in or clamp and gasket
DK195-XEC
 Positive Green LCD, RANGE: 4-20mA, MOUNTING: Snap in or clamp and gasket
PW2-24
 DC Power Supply, 120 AC Input, 24 VDC @ 100mA Output
PW1.0
 Regulated 0.5 amp power supply that accepts 24 VAC at the input and provides 24 VDC at the output.
PW1.5
 Regulated 1.5 amp power supply that accepts 24 VDC/VAC and provides an adjustable 1.5 to 29VDC output.
CVC
 Compact Current & Voltage Calibrator


DATA SHEET

DK190-XEC SERIES

WIRING DIAGRAM

DK190-XEC SERIES

HOW TO BUY

DK190-XEC Series

Look for more quality C-TON products at Digi-Key. 
Keyword: c-ton or enter part number 

If you are unsure of what you want, there is also a product training module or use Digi-Key's Live Online Chat.

© 1992-2020 C-Ton Industries. All rights reserved.