LCD Digital Panel Meters
DK800 Series
Large 3 1/2 Digit LCD
Features and Benefits: | ||
◊ Low-cost, high-performance replacement for many OEM DPMs ◊ Optional Red, Green or Amber backlighting ◊ Snap-in bezel mount eliminates mounting hardware ◊ Resistant to RF and EMI ◊ 12V or 24V DC Voltage powered ◊ User-selectable, displayed engineering units |
||
Specifications: |
||
---|---|---|
Display: | Digits: | 3 ½ digits (±19999 counts) |
Type: | 1” ( 24.9 mm) high contrast LCD | |
Polarity: | automatic, “-” displayed. | |
Decimal Points: | 3 position, user selectable | |
Overrange | three lower order digits blank for inputs >1999 & < -1999 | |
Hold: | display hold function is standard Annunciators: PSI, °F, °C, % (user selected) |
|
Inputs: | Ranges: | ±200.0 mV, +/-2.000 V, +/-20.00 VDC |
Configuration: | bipolar, differential |
|
Protection: |
±350 VDC, (±100 VDC on 200 mV range) | |
Impedance: | >1 M
|
|
Performance: | Accuracy: |
±(0.05% FS +1 counts) |
Conversion Rate: |
3 per second | |
Normal Mode Rejection: |
>30 dB @ 60 Hz | |
Common Mode Range: |
±1 VDC | |
Common Mode Rej.: |
>86 dB | |
Zero Adjustment: |
automatic | |
Warmup: |
10 minutes typical | |
Temperature Coefficiant: |
±100 ppm per °C typical | |
Environment: | Operating Range: |
-10 to 50 °C |
Storage Range: |
-10 to 75 °C | |
Power Supply: | 5V powered: |
+5 VDC (±5%) 3 mA @ 5 V |
Backlighting: |
35 mA typical @ 24 VDC | |
Mounting: | snap-in panel mount or clamp and gasket (included) | |
Connection: | 13 pin male connection | |
Ordering Information: | |
PART NUMBER | INFO |
DK801A |
NO BACKLIGHT LCD, RANGE: 200mV, POWER: +5VDC |
DK802A |
NO BACKLIGHT LCD, RANGE: 2V, POWER: +5VDC |
DK803A |
NO BACKLIGHT LCD, RANGE: 20V, POWER: +5VDC |
J4C13 |
13 pin Connector / Wire Assembly, RED on pin #1, BLACK on pin #2 |
PW2-12 |
DC Power Supply, 120 AC Input, 12 VDC @ 200mA Output |
PW2-24 |
DC Power Supply, 120 AC Input, 24 VDC @ 100mA Output |