Contact Us | Site Map

LCD DIGITAL PANEL METERS

DK500 Series

3 1/2 Digit - Snap-in Bezel Mount

DK500

Features and Benefits:
◊ Low-cost, high-performance replacement for many OEM DPMs
◊ Mounting: Snap-in bezel mount eliminates mounting hardware
◊ Low power: choice of 180µA (9V) or 2.5mA (+5V)
◊ Space-saving design: only 1" (25 mm) deep
◊ Occupies less than 2.5 X 1.1 inches of front panel space
◊ 3 1/2 digits with high-contrast LCD
◊ Optional loop powered 4 to 20mA process inputs available (see DK590)
Specifications:
Display: Digits: 3 ½ digits (±1999 counts)

Type: 0.5" (12mm) high-contrast reflective LCD
  Polarity: automatic, “-” displayed
  Decimal Points:
3 position, user-selectable
  Overrange:
three lower order digits blank for inputs >1999 and < -1999
  Hold: available OEM option, contact factory
Inputs: Ranges:
±200.0 mV, ±2.000 V, ±20.00 VDC
  Configuration:
bipolar & differential
  Protection:
±350 VDC, (±100 VDC on 200 mV range)
  Impedance:
>10 MΩ, (>1 MΩ on 20 V range)
Performance: Accuracy:
±(0.1% +1 count) typical; ±(0.1% + 2 counts) maximum
  Conversion Rate:
2.5 per second
  Normal Mode Rejection:
>30 dB @ 60 Hz
  Common Mode Range:
±1 VDC
  Common Mode Rej.:
>86 dB
  Zero Adjustment:
automatic
  Warmup:
10 minutes typical
  Temperature Coefficient:
±100 ppm per °C typical
Environment: Operating Range:
0 to 50 °C
  Storage Range:
-10 to 70 °C
Power Supply: 5V powered:
+5 VDC (±5%) at 2.5 mA
  9V powered: +7.2 to +12 V at 180 µA
Mounting:
snap-in bezel mount
Connection:   13 pins, 0.025" square on 0.1" lefts - pin 3 missing
     


Ordering Information:
PART NUMBER INFO
DK500
NO BACKLIGHT LCD, RANGE: 200mV, POWER: +5VDC
DK501
NO BACKLIGHT LCD, RANGE: 2V, POWER: +5VDC
DK502
NO BACKLIGHT LCD, RANGE: 20V, POWER: +5VDC
DK503
NO BACKLIGHT LCD, RANGE: 200mV, POWER: +/-5VDC
DK504
NO BACKLIGHT LCD, RANGE: 2V, POWER: +/-5VDC
DK505
NO BACKLIGHT LCD, RANGE: 20V, POWER: +/-5VDC
J4C13
13 pin Connector / Wire Assembly, RED on pin #1, BLACK on pin #2
PW2-5
DC Power Supply, 120 AC Input, 5 VDC @ 300mA Output
PW2-12
DC Power Supply, 120 AC Input, 12 VDC @ 200mA Output
PW2-24
DC Power Supply, 120 AC Input, 24 VDC @ 100mA Output


DATA SHEET
WIRING DIAGRAM
HOW TO BUY

DK500

Look for more quality C-TON products at Digi-Key
Keyword: c-ton or enter part number 

If you are unsure of what you want, there is also a product training module or use Digi-Key's Live Online Chat.