LCD DIGITAL PANEL METERS
DK110 Series
3 1/2 Digit LCD
| Features and Benefits: | ||||||||||||||||||||||
| ◊ Space saving design only 0.67”(17mm) deep ◊ Occupies less than 2.5 x 1.1 inches of front panel space ◊ High contrast LCD ◊ 3 1/2 digits with 0.39” LCD ◊ Snap-In bezel eliminates the need for mounting hardware ◊ Low power requirement (3mA) is ideal for battery powered applications ◊ User-selectable decimal points |
||||||||||||||||||||||
| Specifications: | ||||||||||||||||||||||
| Display: | Digits: |
3 ½ digits (±1999 counts) | ||||||||||||||||||||
| Type: |
0.39” (10mm) high contrast reflective LCD | |||||||||||||||||||||
| Polarity: |
automatic, “-” displayed. | |||||||||||||||||||||
| Decimal Points: |
3 position, user-selectable | |||||||||||||||||||||
| Overrange: |
three lower order digits blank for inputs >1999 & < -1999 | |||||||||||||||||||||
| Hold: | display hold function is standard | |||||||||||||||||||||
| Inputs: | Ranges: | ±200.0 mV, ±2.000 V, ±20.00 VDC | ||||||||||||||||||||
| Configuration: |
bipolar, differential | |||||||||||||||||||||
| Protection: |
±350 VDC, (±100 VDC on 200 mV range) | |||||||||||||||||||||
| Impedance: | >1 MΩ, (>10 MΩ on 200 mV range) | |||||||||||||||||||||
| Performance: | Accuracy: |
±(0.1% +1 counts) typical; ±(0.2% + 2 counts) maximum | ||||||||||||||||||||
| Conversion Rate: | 3 per second |
|||||||||||||||||||||
| Normal Mode Rejection: | >30 dB @ 60 Hz |
|||||||||||||||||||||
| Common Mode Range: | ±1 VDC |
|||||||||||||||||||||
| Common Mode Rej.: | >86 dB |
|||||||||||||||||||||
| Zero Adjustment: | automatic |
|||||||||||||||||||||
| Warmup: | 10 minutes typical |
|||||||||||||||||||||
| Temperature Coeff.: | ±100 ppm per °C typical | |||||||||||||||||||||
| Environment: | Operating Range: |
0 to 50 °C | ||||||||||||||||||||
| Storage Range: | -10 to 70 °C | |||||||||||||||||||||
| Power Supply: | Voltage: |
+5 VDC (±5%) | ||||||||||||||||||||
| Current: | 3 mA | |||||||||||||||||||||
| Mounting: |
snap-in bezel mount | |||||||||||||||||||||
| Connection: | 10 pins, 0.025” square on 0.1” centers | |||||||||||||||||||||
|
||||||||||||||||||||||
DATA SHEET
WIRING DIAGRAM

